My Asus 4G Surf
Asus comes up with something which is a novem: Asus sell the smallest laptop PC ever, with Linux as the NATIVE
operating system. The machine comes with wired and wireless networks STANDARD and these interfaces run out of
the box.
Normally, it takes some namesaying to The Lord to get a wirelsess interface working with Linux. Not on the
Triple E. Here, the hardware has been engineered around the Linux operating system. And it pays off.
| Property | Value | Unit |
|---|---|---|
| Brand | Asus | |
| Processor | Intel Celeron M353, 900 MHz | |
| Frequency | 650 | Megahertz |
| Linux | Xandros | |
| RAM | 512 | Megabytes |
| Drives |
/dev/sda = 4 GB solid state drive
/dev/sdb = external SD card |
|
| Ethernet | Wired : 100 Wireless : 54 |
Mbps |
| IP address | 192.168.56.2 | |
| Running since | March 2008 |
Below, you will find the contents of the most important files for Helium. The Triple E got his own section where you can read about it and its hacks.
/etc/inittab
# /etc/inittab: init(8) configuration. # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ # The default runlevel. id:2:initdefault: # Boot-time system configuration/initialization script. # This is run first except when booting in emergency (-b) mode. si::sysinit:/etc/init.d/rcS # What to do in single-user mode. ~~:S:wait:/sbin/sulogin # /etc/init.d executes the S and K scripts upon change # of runlevel. # # Runlevel 0 is halt. # Runlevel 1 is single-user. # Runlevels 2-5 are multi-user. # Runlevel 6 is reboot. l0:0:wait:/etc/init.d/rc 0 l1:1:wait:/etc/init.d/rc 1 l2:2:wait:/etc/init.d/rc 2 l3:3:wait:/etc/init.d/rc 3 l4:4:wait:/etc/init.d/rc 4 l5:5:wait:/etc/init.d/rc 5 l6:6:wait:/etc/init.d/rc 6 # Normally not reached, but fallthrough in case of emergency. z6:6:respawn:/sbin/sulogin # What to do when CTRL-ALT-DEL is pressed. ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now # Action on special keypress (ALT-UpArrow). #kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work." # What to do when the power fails/returns. pf::powerwait:/etc/init.d/powerfail start pn::powerfailnow:/etc/init.d/powerfail now po::powerokwait:/etc/init.d/powerfail stop # /sbin/getty invocations for the runlevels. # # The "id" field MUST be the same as the last # characters of the device (after "tty"). # # Format: # <id>:<runlevels>:<action>:<process> # # Note that on most Debian systems tty7 is used by the X Window System, # so if you want to add more getty's go ahead but skip tty7 if you run X. # 1:2345:respawn:/sbin/getty 38400 tty1 2:23:respawn:/sbin/getty 38400 tty2 3:23:respawn:/sbin/getty 38400 tty3 4:23:respawn:/sbin/getty 38400 tty4 5:23:respawn:/sbin/getty 38400 tty5 6:23:respawn:/sbin/getty 38400 tty6 # Example how to put a getty on a serial line (for a terminal) # #T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100 #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100 # Example how to put a getty on a modem line. # #T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
/etc/modules
# /etc/modules: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a "#", and everything on the line after them are ignored. snd-hda-intel sr_mod autofs4 ac battery processor #fan button asus_acpi fuse
Multimedia
Page created on 18 March 2008 and
Page equipped with FroogleBuster technology